Hacker

Het familiebedrijf Hacker Model Production produceert al meer dan 30 jaar een groot aantal modellen. Vanaf het moment dat Karel Hacker besloot van zijn hobby zijn beroep te maken. Het bedrijf is gevestigd in Řevničov, Tsjechië.

Naam	Omschrijving	Afbeelding
Fireboat	A fireboat is the general term for watercraft that are specially equipped and manned for the purposes of fire brigades, disaster control or comparable institutions. Fire-fighting equipment is common on these workboats, which is usually aimed at fighting a fire from the waterside. There are also powerful fire monitors available for this purpose. The fire boat kit is ideal for beginners and model builders with less experience. The quick assembly kit contains all parts that are required for assembly. The fuselage is made of high quality PSH plastic. All deck and superstructure parts are made of laser-cut wood, which means that they fit very well. The quick assembly kit already contains many fittings, the drive shaft with stern tube, the propeller and the rudder. Technical specifications: Length: 500 mm Width: 143 mm Height: 200 mm
Pilot boat	When a ship enters the port, a pilot boat brings the pilot to the incoming ship and controls the port. It also brings the pilot back to port after a ship leaves. All pilot boats that transfer sea pilots are marked with the internationally customary PILOT label. The pilot boat pilot kit is ideal for beginners and model builders with less experience. The quick assembly kit contains all parts that are required for assembly. The fuselage is made of high quality PSH plastic. All deck and superstructure parts are made of laser-cut wood, which means that they fit very well. The quick assembly kit already contains many fittings, the drive shaft with stern tube, the propeller and the rudder. Technical specifications: Length: 500 mm Width: 143 mm Height: 210 mm Technical specifications: Length: 500 mm Width: 143 mm Height: 200 mm
Police boat	In addition to general police duties, a police boat also has to perform the enforcement duties of the shipping police. The police boat is responsible for security on German waters, banks, locks and ports. The kit of the police boat is ideal for beginners and model builders with less experience. The quick assembly kit contains all parts that are required for assembly. The fuselage is made of high quality PSH plastic. All deck and superstructure parts are made of laser-cut wood, which has a very good fit. The quick assembly kit already contains many fittings, the drive shaft with stern tube, the propeller and the rudder. Technical specifications: Length: 500 mm Width: 143 mm Height: 200 mm Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina *Modellen Tijdschrift Artikelen* [Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
Micro Magic 2020	The New MicroMagic is back! Hacker has further developed the model and created a professional RC competition sailing yacht that complies with the rules of the international Micro Magic class. Thus the model can be used for worldwide competition. But the New MicroMagic is not only suitable for competition but also for experienced hobby sailors and absolute beginners of RC sailing. The New MicroMagic became especially popular because of its precise sailing characteristics as well as its size and easy transportability The model is available as prefabricated ARTR version or as kit (KIT). Scope of delivery: CNC milled vacuum formed ABS hull, deck, fairing (ARTR version: glued hull) Glass fiber reinforced, injection molded plastic keel fin and rudder Kiel Ballast finished 3D sails size "A" made of Mylar material Carbon fiber tubes for mast and boom Rudder connection components laser cut small parts laser-cut boat stand all small parts Decal sheet Instruction manual RC functions: Sail setting Rudder Control Required accessories: Remote control and receiver with at least 2 channels 10g Servo 48,5g Servo Superglue and activator Plastic adhesive Technical data: total length: 535 mm width: 177 mm total height: 980 mm Total weight: approx. 820 g Sail surface: 1450 cm² Material: ABS Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina *Modellen Tijdschrift Artikelen* [Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
Reggae 21 - RG65 class	The Reggae 21 from Hacker is a racing sailboat for competitions in the RG 65 class, the world's most advanced class for remote-controlled sailboats. The model meets all the technical requirements of the RG 65 class and was developed in cooperation with professional sailors, with particular attention being paid to optimal sailing characteristics in changing weather conditions. The latest technological standards are used in production. The Reggae 21 has a laminated GRP hull with optimal strength and durability with minimal weight. The keel and rudder are made of high quality carbon. The interior fittings of the fuselage - keel box, servo holder and servo lever - are unique both because of the manufacturing technology (selective laser sintering) and because of its concept. The kit contains racing sails with a 3D profile. Scope of delivery: • GRP hull • Carbon keel • Carbon rudder • Carbon mast and boom • ballast • Small parts to complete • Building instructions Required accessories: • Remote control and receiver with at least 2 channels • 2x mini servo 10g • Superglue and activator • Plastic glue Technical specifications: • Total length: 650 + 5 mm • Width: 107 mm • Sail area: 22.5 dm² (sail A) • Total weight: approx. 980 g • Sail area: 1450 cm² • Material: ABS Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina *Modellen Tijdschrift Artikelen* [Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
Grimmershörn	The kit of port tug. The ship was built between 1956 - 1957 and served as a pilot tug at the port of Cuxhaven. Kit includes: All parts for construction of the ship - rudder, ribs, coating spruces, deck and deckhouse components that are precisely cut by laser. All datail parts of the deck and deckhouse, which are made using 3D printing technology. Sterntube , shaft and 4-blade propeller. Items needed: Paints and glues, glass fibre kit, DC motor SPRINT 400/7.2V No. HC 3104, ESC 16A, gearbox 1/3.5, standard servo No. HC 4348 and RC equipment. Lenght: 830mm Width: 216mm Height: 475mm
SD Eileen	SD DEBORAH, SD EILEEN, SD CHRISTINA, SD SUZANNE are tugboats produced by Dutch Damen company. Were put into operation between 2010 and 2012 years and serves on the ROYAL NAVY bases. Kit includes: All parts for the construction of the ship - ribs, coating spruces, deck and deckhouse components that are precisely cut by laser. Kit includes all parts of the equipment deck and deckhouse, drive units (without motors) which are maded using 3D printing technology. The boat is controlled with two main azipod units and with front transverse thrust. Items needed: Paints and glues, glass fibre kit, power set No. HC 3185 (2x DC motor SPRINT 600/12V BOAT, 1x DC motor SPRINT 400/7.2V, 2x ESC 56A, 1x ESC 16A, gearbox 1/3.5), two standard servos No. HC 4348 and RC equipment. Lenght: 880mm Width: 390mm Height: 593mm Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina *Modellen Tijdschrift Artikelen* [Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
SD Suzanne	SD DEBORAH, SD EILEEN, SD CHRISTINA, SD SUZANNE are tugboats produced by Dutch Damen company. Were put into operation between 2010 and 2012 years and serves on the ROYAL NAVY bases. Kit includes: All parts for the construction of the ship - ribs, coating spruces, deck and deckhouse components that are precisely cut by laser. Kit includes all parts of the equipment deck and deckhouse, drive units (without motors) which are maded using 3D printing technology. The boat is controlled with two main azipod units and with front transverse thrust. Items needed: Paints and glues, glass fibre kit, power set No. HC 3185 (2x DC motor SPRINT 600/12V BOAT, 1x DC motor SPRINT 400/7.2V, 2x ESC 56A, 1x ESC 16A, gearbox 1/3.5), two standard servos No. HC 4348 and RC equipment. Lenght: 880mm Width: 390mm Height: 593mm
St. George Cape Class Patrol Boat	St George Cape Class Patrol Boat was built by AUSTAL in 2013 as a patrol boat for the Australian coast guards. AUSTAL has since produced a whole fleet of boats in this category. This kit in scale 1:48 combines various technologies and its concept aims to simplify the built of the model. The ABS hull is ready-made. The shaft holes are pre-drilled. The deck and bridge parts are laser cut to achieve a maximum precision. The plastic frames as well as other parts are produced using the same technologies. The kit also contains a lot of fully functioning plastic parts that have been produces using a high-end Selective Laser Sintering technology. The kit contains: All the parts needed to build a model, shafts and propellers, transverse thurst engine. Items needed: RC Set with at least 4 channels MASTER Giga Prop 4 No. HC4100, 1pc mini servo 15-25g No. HC4312, CA glue, CA kicker, wood glue, paints, laminating kit, basic tools. Weight: from 5500g Lenght: 1200mm RC: 4 Motor: SPRINT BOAT 600/12V Width: 236mm Height: 415mm Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina *Modellen Tijdschrift Artikelen* [Deze pagina is alleen toegankelijk voor VMBC het Anker leden]