VMBC het Anker

Varende modelbouw club uit Nieuwegein. Informatie over de club en haar activiteiten.

Ansmann

Je bent hier:
← All Topics
NaamOmschrijvingAfbeelding
La Belle MargotVan deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina
Modellen Tijdschrift Artikelen
[Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
MichiganThe Michigan is a “triple cockpit barrelback runabout”. These boats with a rounded rear were named “barrelback” after their shape. Boats of this type were built in the USA from the 1930s to the late 1940s. This is an impressive model with an unusually narrow hull shape that is also built using the most exquisite woods. It's a classic hand-made pleasure craft with a high-quality finish and an underwater plastic seal to protect the hull material when driving.
Motor with complete propulsion unit incl. motor controller, steering gear ready to run with servo. Required accessories needed before the model can be driven: drive battery, receiver and transmitter.
Length 830mm
Width 225mm
Height 230mm
Hull GRP/decorative wood
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 550
• Speed controller
US Coast GuardThe US Coast Guard is a very interesting rescue boat. The original secured and patrolled maritime traffic, pursuing offenders on the coasts and high seas. These boats became famous due to their clearly visible orange colour. The exceptional details also have a lot to offer to those who take a closer look. The Coast Guard is characterised by its speed and extreme agility. This model is no exception and offers these same positive characteristics. Once the RC components and the drive battery have been installed the model is ready to
run.
Length 932mm
Width 190mm
Height 450mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 2x 550
• Speed controller
LuganoLugano is the brand name of an Italian motorboat maker. Lugano boats feature premiumquality
craftsmanship and in the 1950s were a symbol of luxury and exceptional joie de
vivre. For this reason they are also called the Rolls-Royce of the sea.
A powerful inboard motor drives the boats and attracts attention with its penetratingly deep
sound. A lot of chrome, a panorama screen, a classic dashboard with white steering wheel,
a white leather armchair and behind it an upholstered lying surface, as well as a narrow,
outward extending stern – these are the classic design characteristics.
Length 590mm
Width 180mm
Height 150mm
Hull GRP/decorative wood
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 480
• Speed controller
RevivalThe Revival is a true-to-life replica of an Italian pleasure craft. The original was built in Sarnico on Lago de Iseo in the 1970s and globally marketed with great success. These boats were very popular and known as “toys” for members of the high society. The model for our Revival, a total of 277 of these pleasure
crafts were built by hand using the most exquisite woods from
1972-1996. Just like the original, our model is hand made using mahogany
strips, has a clear lacquer, is polished and sealed. The propulsion unit comes pre-assembled and is ready to run with a rudder servo and electronic motor controller.
Length 850mm
Width 250mm
Height 200mm
Hull GRP/decorative wood
• Ready-to-run pre-assembled model
• Boat stand
• Steering servo
• Electric motor 550
• Speed controller
OntarioThe Ontario is a replica of the first true speed boats from
the USA. This type, known as the “Triple Cockpit Runabout”,
was quite powerful with the typical large-volume American motors. These boats were very popular from the late 1920s to the early 1940s. Rarely seen in Europe, these boats are the stars of the old-timer scene in the USA. Just like the original, the model's main material is mahogany. The underwater hull is covered with GRP to protect the exquisite hull material from damage. Preassembled, ready-to-run propulsion unit with electronic motor controller and rudder servo.
Length 1100mm
Width 220mm
Height 150mm
Hull GRP/decorative wood
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor
• Speed controller
SOS Coast GuardThe Coast Guard is a rescue boat in the British fleet. The original
secures and patrols maritime traffic, pursuing offenders
on the coasts and high seas. These boats became famous due
to their clearly visible orange colour. The exceptional details also have a lot to offer to those who take a closer look. The Coast Guard is characterised by its
speed and extreme agility. This model is no exception and offers these same positive characteristics. Just install the RC components and the drive battery and the model is ready to run.
Length 730mm
Width 220mm
Height 470mm
Hull GRP
• Ready-to-run pre-assembled model
• Boat stand
• Steering servo
• Electric motor 2x 550
• Speed controller
Smit AmsterdamJust like the original, the Smit Amsterdam was first and foremost conceived as a harbour tug, but also for rescuing disabled vessels as well as for use on the open sea. It is driven by two pitch propellers set in fixed Kort nozzles. Becker
rudders behind the Kort nozzles efficiently steer the ship. This makes it possible for both the model and the real-life version to turn on their axis (naturally, with separate motor activation). Equipped in this way, these multi-purpose tugboats reach a speed of 12.6kn and a bollard pull of 28t. Just install the RC components and the drive battery and the model is ready to run.
Length 820mm
Width 260mm
Height 500mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor
• Speed controller
ElcanoThe ocean's unending vastness fascinates every sailor. Take a great journey with immaculately detailed and true-tothe- original model ships. Our programme showcases wonderful model ships, starting with fish cutters right through to
sailing yachts. Sail the seas and enjoy your ship as the wind carries you away.
Length 583mm
Width 212mm
Height 445mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 550
• Speed controller
• 2 sailor figures included
Le Petit CharlesThe Petite Charles is an excellent replica of a typical shrimp cutter from Vendee, which is based on the Sables-d'Olonne just as it is seen in vast numbers at various harbours.
Length 583mm
Width 212mm
Height 445mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 550
• Speed controller
• 2 sailor figures included
Marie AstridThe beautiful and accurately detailed Marie Astrid is a reproduction of a fish cutter from Boulogne as it is seen in vast numbers at various harbours. The model is delivered fully assembled. The hull is made of robust fibreglass. The Marie Astrid is also a very beautiful display model.
Length 560mm
Width 200mm
Height 320mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 450
• Speed controller
• 2 sailor figures included
Dolce VitaThe Dolce Vita is a real looker with its striking design. Its unique appearance isn't the only thing that makes it special: Its exceptional detail also has a lot to offer to those who take a closer look. The original boat was equipped with
a 12-cylinder, 550hp engine and achieved the world record speed of 241.708km/h. The Dolce Vita is an exact replica and mirrors the original in both speed and agility.
Length 720mm
Width 360mm
Height 150mm
Hull GRP/decorative wood
• Pre-assembled model
• Boat stand
• Steering servo
• Electric motor 550
• Speed controller

Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina
Modellen Tijdschrift Artikelen
[Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
Triumph 800The Triumph 800 is the perfect model sailboat for every true water sports enthusiast. Special attention was given to the sailing characteristics in the making of this model. The special hull construction offers the advantages of improved dimensional stability, faster planing with corresponding wind and waves as well as a high level of water displacement.
Length 800mm
Width 1800mm
Height 1500mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Sail servo
• Painted fibreglass hull

Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina
Modellen Tijdschrift Artikelen
[Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
Gemini 600Be the skipper on your own sailing catamaran and let your model glide without a sound as it is pushed over
the water by the force of the wind. The simple construction and easy handling make this precisely guided
boat particularly ideal for beginners in this area of modelling. And because we provide your new boat largely
pre-assembled, in just a few minor steps you'll be ready to set sail! Go to sea and enjoy your own catamaran as
you sail away with the speed of the wind.
Length 600mm
Width 285mm
Height 1100mm
Hull GRP
• Pre-assembled model
• Boat stand
• Steering servo
• Sail servo
• Painted fibreglass hull
• Speedcontroller
• Electric motor

Van deze boot is er een tijdschrift artikel [of meer dan 1] te vinden op de pagina
Modellen Tijdschrift Artikelen
[Deze pagina is alleen toegankelijk voor VMBC het Anker leden]
AligatorIt zooms by with lightning speed... that's the only way to describe this speedboat from ANSMANN RACING

A model for speed freaks

This giant-sized turbo speedboat makes use of the latest and most advanced propulsion technology available on the model-building market today. The powerful, high performance engine brings the Alligator up to lightning speeds in the blink of an eye. The Alligator is super fast and very manoeuvrable thanks to its construction. Not for the faint of heart!
The speedboat is attractive, aerodynamic design gets looks at every race.
•Length:1300 mm
•Width: 430 mm
•Height: 300 mm
•Hull: fiber glass

•Multi-color painted fiberglass hull
•Aluminium double rudder
•Aluminium Racing propeller
•26 cm³ water-cooled gasoline engine
•Centrifugal clutch
•splash-proofed radio box
•total length of 1,30 m
The PikeThis mono speed boat will convince you. With its semi-submerged Brushless drive it goes also on rough water well. The boat has the highes fun factor with every push on the accelerator.

The propeller is directed over the rudder. So "The Pike" is very agile.
Experience the action-packed water sports with absolute high-speed.


Brushless Motor: 2.700kV
Length: 840mm
Width: 215mm
Height: 170mm
Weight (without RC): 1.200g

•2.700kV Brushless Motor
•Brushless speed controller with up to 60A continuous load;
LiPo 2-3 cells or 4-10 cells NiMH battery;
Modes: Fwd / bwd / brake; BEC 6V 1.5A; overheating protection; LiPo low voltage protection
•Incl. Servo for rudder system
•Hydro Power
•Incl. 2.4GHz radio system W5: 2-Channel Transmitter / 3 Channel Receiver; Reverse function, trim, dual rate adjustable; Fail Safe function, mini receiver.
•Hull made of molded ABS
•Waterproof Controller